But there are also some very unique body styles to choose from. Many manufacturers have body styles that are Fender Strat like, or Gibson Les Paul like. There are infinite body styles out there to choose from. This is a good place to transition to the next guitar hardware section. The strings could come up through the bottom of the body (terminating on the back of the body) with a Tune-o-matic bridge (like some Carvin guitars). You could be set up with a tremolo unit that builds the bridge and saddle into the mechanics of the tremolo. On a Les Paul style bridge, there are two pieces: the Tune-o-matic bridge (which includes the saddle) and the bar stop. The strings can terminate in any number of different ways. Rich guitars and some others will give you 24 frets (2 octaves) on their fingerboards.
#Double sided axe guitar full#
A standard fingerboard typically runs 22 frets for most guitars, not quite a full two octaves. The strings run over the fingerboard, which is usually made with maple, rosewood or ebony. Fender uses maple for some of their guitar fingerboards. The strings run over the fingerboard, which is usually made with rosewood or ebony.
There are grooves in the nut that position the strings evenly over the fingerboard for their trip up the neck to the bridge. The nut is usually made out of plastic, bone, ivory or brass.
On the post there is a small hole drilled through the post - the string gets inserted here so the string can then be wound around the post.ĭepending on the headstock style of your guitar, you can have all of the tuners on one side of the headstock (like a Fender Stratocaster), have three on each side (think Gibson Les Paul), or have a complete hybrid configuration like the Music Man guitars with four tuners on top and two on the bottom of the headstock.Īt the base of the headstock where the neck actually begins, you find the nut, which is the block that guides the strings from the tuners onto the neck. Tuners are pretty simple sprocket mechanisms, consisting of a peg and a post. Your strings run from the body up the neck to the machine heads, where they are wound around the post of the tuner. Some even go so far as to put tuners on the headstock AND the body (like the B. I say in most cases, because there are manufacturers that will put the tuners at the bottom of the body (Steinberger is a good example). In most cases, this is where the machine heads (tuning pegs) are found.
The headstock is the very top of the neck, furthest away from the body of the guitar. One notable exception is an all aluminum neck. Many manufacturers use maple for the neck, although other materials have been used. Without the fingerboard and machine heads (tuners), you’d have six strings that all sound the same. The neck is pretty much the business end of the guitar. There are two main parts to a guitar – the body and the neck. Then I’ll talk about modifications to guitar hardware you can make to change how it sounds. In this section I want to cover the anatomy of the electric guitar. Yea, there are all sorts of electronic modifications you can make to get different sounds out of your axe, but for the most part, you’re dealing with a block of wood, some strings, and some pickups for guitar hardware. In fact, at the basic level, there really hasn’t been much change to the guitar. The modern rock guitar as we know it has been around for over 50 years. Prior to that the sound was amplified through sound holes in the body of the stringed instrument. The guitar has been around for over 5000 years in one shape or form, but only within the last 75+ years has it been set up for amplification through electronics. Let's talk now about guitar hardware and how this thing is put together to become a piece of rock machinery.
0 kommentar(er)
